No RF on AM

[John King]

John, Gary has a great question. When on CW, the
secondary winding of mod xform is shorted across
placing the H.V. on the final tube plates.

On A.M. the secondary is unshorted and the H.V. is run
through the secondary winding to final tube plates.

Check for H.V. on input side of secondary of mod xform
to see if there is voltage there with switch in A.M.
position  and then check on output side of secondary
for H.V. going to final tube plates.

Hopefully it is not the secondary of mod xform being
open. Good luck and 73, John, K5PGW


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html