[Heathkit] Yoiks! A restorers worst nightmare
Gary H. Harmon Jr.
gharmon at IDWORLD.NET
Tue Feb 6 15:05:25 EST 2007
Actually, a worse nightmare would be a rig where the RCA output jack had
been replaced with a normal coax connector. Very difficult to restore to
normal even though the normal coax connector is better.
Been there done that! And then there was the HW-101 with a driver's license
number engraved in the FRONT panel. Mercy.
73, gary
=========////////==========
Gary H. Harmon, Jr. - K5JWK
6003 Archwood
San Antonio, TX 78239-1504
210.657.1549 - Home
210.884.6926 - Cell
-----Original Message-----
From: Heathkit Owners and Collectors List [mailto:HEATH at LISTSERV.TEMPE.GOV]
On Behalf Of Richard M. Gillingham
Sent: Tuesday, February 06, 2007 12:19 PM
To: HEATH at LISTSERV.TEMPE.GOV
Subject: Re: [HEATH-TEMPE] [Heathkit] Yoiks! A restorers worst nightmare
If you don't have a sleeve, use two nuts appropriately spaced. For the
screw, look at toggle bolts at your favorite hardware store.
Good luck,
Gil, W1RG
----- Original Message -----
From: <LeeCraner at aol.com>
To: <kf4nsradio at verizon.net>; <boatanchors at mailman.qth.net>;
<HEATH at LISTSERV.TEMPE.GOV>; <heathkit at mailman.qth.net>
Sent: Tuesday, February 06, 2007 12:05 PM
Subject: Re: [Heathkit] Yoiks! A restorers worst nightmare
> Been there, done that. But you won't be able to solder aluminum.
>
> Try using a 4" +/- 6-32 machine screw and a small hollow tube (aluminum,
> copper, even a ball point pen barrel). That is how I make my standoffs
> for my
> homebrew gear. I you have trouble finding an appropriately long screw,
> you could
> salvage one off of an old power transformer.
>
> At least that will get you going until someone on the list comes to your
> rescue.
>
> 73
> Lee WB6SSW
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved. This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind. Buyer beware!
-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------
Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html
-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved. This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind. Buyer beware!
-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------
Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html
More information about the Heath
mailing list