Need SB-200 Hi Voltage Hookup Wire (Large Blue)

[Cal Pulliam]

I am installing a soft start mod into my SB-200. The large blue high voltage wire that connects from the HV supply to RFC going to the finals does not have enough slack to position around the soft start mod where it will be installed. Looks like that there was not much slack left in this wire when SB-200 built. I would like to replace the large blue HV wire with a longer one of the SAME COLOR (blue) to stay per original as possible. Does anyone have HV wire that could help me out. This wire is about 1/8 inch od. and if I could get around 12 to15 inches length sure would appreciate. If anyone can help me on this I would be glad to pay you for it. 

Cal Pulliam
cpullia at bellsouth.net

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html