HW-101 and SB-610

[W6CUX]

(Sorry Glen, I've lost the initial email from Darryl on this subject so 
you have become the point of contack.)


Darryl:
When in doubt read the manual. This is available at:
http://bama.edebris.com/manuals/heath/sb610/  SB-610.pdf    (rt. click 
to dwnld)
Look on pdf-pg16, manual-pg 33. It's all there.

I would use RG174 to the spare jack on the back of the HW-101 (as Glen 
suggests) and then RG62 between the two units (as the manual suggests). 
Be carefull about the cable routing --  it's easy to get an oscillator 
going around these high gain IF stages.

73, Stu W6CUX


Darryl Jones wrote:

I finally have an SB-6109 with the righ IF can, and am wondering where 
to tap the IF to hook to the vert on the 610 to scope received signals. 
Has anyone modified the ALC jack on the back for this?

Thanks, Darryl

Glen Zook wrote:

>[clip]
>
>First of all, I am not the person who was asking about
>hooking up the HW-101 to the SB-610.  I was pointing
>out that there is a "spare" RCA jack on the back of
>the HW-101 that could be used for connecting to the
>i.f.
>
>Glen, K9STH
>
>  
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html