Need SB-200 Input Coil # 40-592

[Glen Zook]

It is pretty easy to replace the slug.  Take a small
metal probe and VERY CAREFULLY chip the old slug
moving from the slug to the middle.  The slug will be
cracked, usually in several places.

Once you get the material removed from one section the
slug will just fall apart.

I have done this with quite a few coils over the
years.  Of course the second time is MUCH easier than
the first (once you have learned the "technique").

Glen, K9STH


--- "Gary H. Harmon Jr." <gharmon at IDWORLD.NET> wrote:

The slug is not only broken, but frozen in place. If I
can't get an intact replacement coil, is it possible
to insert a replacement core?









Glen, K9STH

Website:  http://k9sth.com


      ____________________________________________________________________________________
Park yourself in front of a world of choices in alternative vehicles. Visit the Yahoo! Auto Green Center.
http://autos.yahoo.com/green_center/ 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html