SB-102, the saga continues
Glen Zook
gzook at YAHOO.COM
Mon Sep 24 11:08:31 EDT 2007
I would tighten all of the machine screws and all of
the nuts that go through the chassis of the unit. All
of the grounds in the transceiver are made through
these connectors and they definitely work loose over
the years.
Next, most of the Heath SB-Line and HW-100 and HW-101
are not "happy" with the 6146B family (6146B/8298A or
any 6146W with a code date of after mid 1965). The
6146B family is different from the 6146 and
6146A/8298. For the article on the 6146 family of
tubes that was published in Electric Radio a while
back go to
http://k9sth.com/Page_2.html
The link is the first one below the heading
"Articles".
Glen, K9STH
--- Bob Groh WA2CKY <rgroh at SWBELL.NET> wrote:
Probably some of those more familiar with the SB and
HW tube line will contribute a more solid idea, but I
would also suspect bad grounds on the boards. It
certainly sounds like oscillation and possibly due to
RF feedback all the way back to the input of the
driver. So, if you haven't already done so, I would
carefully loosen and then then tighten all PCB
mounting screws. You might also keep a close eye on
the connections for any signs of corrosion, etc. Just
a thought.
Glen, K9STH
Website: http://k9sth.com
____________________________________________________________________________________
Yahoo! oneSearch: Finally, mobile search
that gives answers, not web links.
http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved. This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind. Buyer beware!
-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------
Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html
More information about the Heath
mailing list