[HeathKit-Radios] Help Connecting Heath SB-610 to SB-101 for recv monitor

[Dick KF4NS]

Emil,
OMG! I cannot believe that stuff is still available. I have two small 
cans of DC4 that I absconded while in the Navy over 40 years ago. We 
Radiomen used to have to go up on the yardarm in some of the most 
awful weather to apply that stuff to our antenna insulators after 
cleaning them to keep the salt off, then meggar the antennas. That 
brings back memories. Sure was great when I made RM2 so somebody else 
had to do that lousy job.
73, Dick KF4NS
St Petersburg, FL 33714 USA
Keep The Glow!

----- Original Message -----------------------------------
>
> Date:    Fri, 8 Aug 2008 18:01:43 -0400
> From:    Emil M Dular <wd4scz at AOL.COM>
> Subject: Re: [HeathKit-Radios] Help Connecting Heath SB-610 to 
> SB-101 for recv monitor
>
> Bob,
>
>
> ".... we used to use a Rocol 8S silicon grease for core lubrication 
> / locking but I have
> not  been able to trace it today."
>
> Is it similar to Dow Corning DC-4 silicone?
>
> http://www.skygeek.com/dc4.html
>
> I sure have used a lot of this stuff around airplanes.
>
> Emil WD4SCZ
>
*************************************** 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html