SB-102 VFO

[Emil Dular]

My SB-102 has a 6HS6 as V10
73  Emil WD4SCZ

----- Original Message ----- 
From: "Dwight Smith" <wb8jpj at VERIZON.NET>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Thursday, February 07, 2008 16:24
Subject: SB-102 VFO


> Another SB-102  question.  Did all the SB-102's have an 6sh6 in the V-10
> position as stated in a well know Heathkit book, or did some have the
6au6?
> I have one marked SB-102 on the front panel with a tube type VFO but the
> circuit board is marked for a 6au6 in the V-10 position.  Is this an
SB-101
> with the wrong label, or a SB-102 that has had the VFO changed and the rf-
> driver circuit board changed also,  or what is it?
>
>
>
> Dwight   WB8JPJ
>
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://listserv.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html