Another capacitor for the HW-16 kit..

[Tom NØJMY - AAR7FV]

At the suggestion of one of my vendors, I have decided to add a 10 mfd @ 
35V axial electrolytic capacitor to all re-cap kits for the HW-16.  This 
is to replace the original cathode bypass capacitor in the receiver's 
audio power amplifier stage.  The original cap was a 10 mfd @ 15V unit.

The inclusion of this capacitor will be done at *no charge*, and brings 
us to the point where a replacement for every electrolytic capacitor in 
the HW-16 is included in the kit.  The extra cap will be included on 
orders in house.

Here then is the updated list of capacitors included in the HW-16 Re-Cap 
Kit:

Qty. 1 - Multi-Section can-type capacitor:  47 mfd @  450V /  47 mfd @  
450V / 100 mfd @ 250V / 100 mfd @ 350V.
Qty. 2 - Radial-lead electrolytic capacitors for voltage doubler, above 
or under-chassis mount. 47 mfd @ 450V.
Qty. 2 - Axial-lead electrolytic capacitors for bias supply:  22 mfd @ 160V
Qty. 1 - Axial-lead electrolytic capacitor for cathode bypass, audio 
power amp: 10 mfd @ 35V.
Qty. 6" - De-soldering braid

All capacitors rated at 105C.

If you missed the particulars about the multi-section cap, I finally 
managed to put it on-line at http://www.hayseedhamfest.com/capkit.htm .

The first production run is finished and will ship next week.

Many thanks for all your support!

73 es best dx,
Tom .  .

-- 
Inexpensive Heathkit HW-16 Front Panel Overlays - www.hayseedhamfest.com .

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html