Source for Finishing / Dress Washers

[Roy Morgan]

At 11:55 AM 1/14/2008, Paul Pagel wrote:
>I've been trying -- without luck -- to locate a source of what I think
>are called "finishing" or "dress" washers. ... for a
>3/8-inch-diameter CW key jack....
>Does anyone know of a source for such hardware?

Paul,

Search the Switchcraft site. If no luck, email them.  I'd be surprised if 
they don't have what you want: for example they still make the jack covers 
that are/were found on military gear such as the BC-348, in black and army OD.

http://www.switchcraft.com/

Click Product Lines, Jacks and Plugs, then scroll ALLL the way down to 
Mounting Hardware.  (You'll pass the link for Jack Covers.) Once you find 
the part number, hit Mouser or others with that.

If all else fails, there are some places dedicated to military fasteners.. 
Costly but they have an astounding selection of hardware.

Roy


- Roy Morgan, K1LKY since 1959 - Keep 'em Glowing
13033 Downey Mill Road, Lovettsville, VA 20180
Phone 540-822-5911   Cell 301-928-7794
Work: Voice: 301-975-3254,  Fax: 301-975-6097
roy.morgan at nist.gov --  

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html