SB-200

[Wilson Lamb]

BE CAREFUL
DON"T TRUST THE BLEEDER TO DISCHARGE THE CAPS.
USE A CHICKEN STICK!

It would be better to use more resistors, of lower value.  They will drift 
less with age and be less prone to breakdown across their surface.
WL
----- Original Message ----- 
From: "The Heathkit Junkie" <w0qni at JUNO.COM>
To: <HEATH at LISTS.TEMPE.GOV>
Sent: Thursday, June 26, 2008 1:26 PM
Subject: SB-200


> Paul:
>
> After working on many 200-201's, most of the time it is the resister
> string on the bottom of the power supply board to the meter switch. There
> are 3- 4.7 Meg resister in the string. Please check them out first.
>
> Bill - WØQNI
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
> To post - HEATH at LISTS.TEMPE.GOV
> Archives - http://lists.tempe.gov/archives/HEATH.html 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html