sb-201

[john]

You'll get it going, they're pretty simple amps.

Do the input circuit adjustment and let's see what happens!

John

At 10:58 PM 5/23/2008, Terry England wrote:
>I made a few tests into a dummy load and this is what i found. Not sure 
>about the readings because the meter acts funky to me.
>80m 600w
>plate 400ma
>grid 40mil
>low swr
>40m 300w
>plate 400ma
>grid meter deflecks backward's
>low swr
>20m 350w
>plate 300ma
>20mil
>swr was hi
>15m 10m no output
>plate 80ma grid very little movement hi swr
>10m plate 60ma grid very little movement
>hi swr
>I would say that this amp is in a mess but i will get it going again like 
>it should. Tnx w9cau
>
>-----------------------------------------------------------
>Products bought, sold or traded here is the responsibility of the
>parties involved.  This list and the City of Tempe are not responsible
>for losses or misrepresentations of any kind.  Buyer beware!
>
>-----------------------------------------------------------
>This list is a public service of the City of Tempe, Arizona
>-----------------------------------------------------------
>
>Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
>To post - HEATH at LISTSERV.TEMPE.GOV
>Archives - http://listserv.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html