Frozen band switch on Mohican receiver

[Mike Bryce]

Well gang, the subject line says it all

got escrewed with this "works just fine" mohican

band switch is frozen

I can get it to move with a vise grip, but afraid I'll break out the  
wafer switches as the whole switch flexes when I attempt to turn it  
with the vise grip.

I've put some teflon micro oil on the shaft where it goes into the  
bearing and tried rocking the shaft back and forth.

right now.. unless I can free up the band shaft, this thing is a goner..

I did manage to get the band switch on the broadcast band and the  
receiver does work after a fashion

any ideas to free up a frozen shaft like this??

Mike, WB8VGE
SunLight Energy Systems
The Heathkit Shop
http://www.theheathkitshop.com/
J e e p
o|||||||o
Note: No trees were killed in the sending of this message, but a large  
number of electrons were terribly inconvenienced



-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html