Frozen band switch on Mohican receiver

[Bob Krassa]

 Probably you already have done this, but before applying force, take the
chassis out of the case - just unscrew the big antenna and take out the
little screws on the back and slide the chassis out the back - and take a
very careful look at the bandswitch to see if there are bits of wire or
other stuff, bent tabs, solder bridges or the like from shipping or from the
previous owner that may be jamming the switch.  For example, a small chunk
of a styrofoam peanut will jam it real tight.  You do not want to have to
rebuild or replace any contacts or wafers.

73 Bob Krassa AC0JL



-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the parties
involved.  This list and the City of Tempe are not responsible for losses or
misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html