PART ID PLEASE
Robert Groh
rgroh at SWBELL.NET
Sat Aug 8 13:26:27 EDT 2009
Assuming the SG-7 seems to be very close to the SG-8 (which I have) and uses the same transformer. From the schematic, the power transformer has a 117VAC primary (not too surprising) and the secondary has a 6.3 VAC winding for the two tubes (a 6C4 and a 12AU7) and a 120 VAC secondary. I'm totally guessing at the tube filament draw (I'll leave you to look up the tube charts) but it probably 400 mA each. The B+ current drain is maybe 10 to 20 mA. So maybe 6.3 VAC at 1A and 120VAC at 20 mA for the transformer.
Hope this helps.
73
Bob, WA2CKY
________________________________
From: k2sse <k2sse at EMBARQMAIL.COM>
To: HEATH at LISTS.TEMPE.GOV
Sent: Saturday, August 8, 2009 9:51:34 AM
Subject: [HEATH-TEMPE] PART ID PLEASE
Have a Sig Gen model SG 7 with bad Power Transformer Heath part
54-2 circa 1953 or so.
Can anyone give me specs on this Transformer?
Thank you
Al
-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved. This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind. Buyer beware!
-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------
Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html
-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved. This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind. Buyer beware!
-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------
Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html
More information about the Heath
mailing list