HP-23 power supply question?

[David S. Fieseler]

All

 

I am literally moments away from attempting to go on the air with a SB-101
for the first time. There is only ONE thing holding me back!

 

I currently have the SB-101 hooked to a HP-23A power supply. Is this a
"valid use" for this supply or is this the one for A HW-101

I have only to plug the PS into the outlet and then comes the next problem.

 

If this is the correct power supply for this rig, WHERE IS THE POWER
SWITCH???? I have 2 SB-101's and 3 HW-101's that I have collected over the
years. The ONLY heath rig that I have had on the air is a 5400 I assembled
myself. I have never had a HW or an SB-101 on the air. On the HW's there is
a switch on the AF gain to control the PS but that does not seem to exist on
either of the SB-101's that I have. So if I have the correct PS and rig
combination just where is the power switch.

 

I just passed my extra a couple weeks ago and am chomping at the bit to get
on-the-air but do not want to rush in ad wind up with a nice paperweight
where a good rig sat seconds earlier.

 

Also: I am a disabled vet, I have had 3 brain surgeries as a result I take a
LOT of pain meds (approximately 120Mg of morphine / day) can someone tell me
a step-by-step basic tune-up procedure for either a SB or a HW 101. I worked
in back shop avionics on the f-111 and the f-117 aircraft so I am no dummy
on the theory. 

 

Dave

KA3QYK


-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html