HW-101 Question

[Glen Zook]

Have you replaced the final amplifier tubes lately? If so, did you use 6146B/8298A or 6146W tubes?  The Heath HW-101 does not generally "like" the 6146B series of tubes.

Also, tighten EVERY machine screw and nut in the unit.  All of the grounds in the unit are made through these and they definitely work loose and/or become corroded over the years.  Doing this "fixes" about 90% of the "strange" problems that I run into on boat anchor equipment.

Check the diodes in the balanced modulator, they do tend to go bad over the years.

Glen, K9STH

Website:  http://k9sth.com


--- On Mon, 3/23/09, Gary H. Harmon, Jr <gharmon at IDWORLD.NET> wrote:

HW-101 that was working has now started being a pill.  Now, when you go to TUNE you get full output but the LEVEL control has no effect.  Further, in the CW position key down has no effect.


      

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html