Center-Tapped vitreous Resistor needed...

[Alexander N Gerli Sr]

Hi, gang!

I'm rebuilding (improving, actually) a UT-1 Power Supply for my MR-1/MT-1
pair and it's running pretty well; new diodes, new 40uF axials. The original
125uF cans seem OK coming up slow on the Variac, voltages look pretty good.

But I'm not real happy with the original 30K 25W CTR for the bleeder. That
sucker's hot as a pistol. Seems as though it should really be a 50W for
safety's sake. But, can I find one that size? Heck no.at least not at
Allied, Mouser or ??

Can someone offer me a lead or two to hunt one down? There's plenty of room
where the original one's mounted on the chassis, for a 50W job.

73,

Sandy AC1Y


Alexander N. (Sandy) Gerli, AC1Y/G5CPJ
4012 Bristol Road
Durham, NC  27707-5403
(919) 489-9638
CCA #AC96-00001
 
REAL radios glow in the dark!!!!
Sandy Gerli AC1Y
4012 Bristol Rd
Durham NC 27707
				


-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html