Center-Tapped vitreous Resistor needed...

[Bob Burns]

In a message dated 09/04/2010 21:24:42 GMT Standard Time, ac1y at NC.RR.COM  
writes:

Can  someone offer me a lead or two to hunt one down? There's plenty of  
room
where the original one's mounted on the chassis, for a 50W  job.

73,

Sandy AC1Y



Hi Sandy
 
How about two 15K 25W units in series? Alternatively is there a better way  
to achieve the same result without such a high dissipation?
 
73

Bob

Bob F Burns
Amateur  Radio Callsign: G3OOU
G-QRP Member No: 6907; QRA: IO91WH; WAB: TQ25
Joint  web site with Crystal Palace Radio & Electronics Club: 
_www.g3oou.co.uk_ (http://www.g3oou.co.uk/) 
Technical web site: _www.qsl.net/g3oou _ (http://www.qsl.net/g3oou) 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html