[Heathkit:Yahoo] hole in SB cabinet

[Walt - WB2VSJ]

I *think* it was for the SB-640 Remote VFO connection.  MY SB-101 has a 9
pin molex connector there but no mention of it in the SB-101 manual.  The
SB-640 manual tells how to wire your rig up for it and it shows a 9 pin
connector in the schematic.

Walt - WB2VSJ


-----Original Message-----
From: heathkit at yahoogroups.com [mailto:heathkit at yahoogroups.com] On Behalf
Of Paul Kraemer
Sent: Wednesday, March 17, 2010 9:49 PM
To: heath at lists.tempe.gov; heathkit at mailman.qth.net;
heathkit at yahoogroups.com
Subject: [Heathkit:Yahoo] hole in SB cabinet

A friend asked "why is there a rectangular cutout in the rear of some SB 
line cabinets"?
I confessed to not knowing the answer to that one.
Now I am curious. Why did Heath pre-punch that hole like a knock out? What 
is it for?
Paul K0UYA 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html