OT: Foam Tape Question Follow-up

[Phill Peterson]

Thank you very, very much to all of you who read/responded!  I apologize for not being more
  specific about characteristics.

Thickness : 3/16 in. ; Width : 1/4 in.
Application : Used for damping mechanical vibration and dust shielding.  Built kits that used this
                       type of foam were mainly stereo, speaker, and test-equipment.
No voltage/current/heat/puncture-resistance considerations apply.

The porosity was "medium", allowing sufficient "smashing" when screwing down panels,
   speakers, etc.
 
Have been subscribed for years, and have learned alot!  Basically a Heathkit TE and "audiofool" who
   wanted to build "that ultimate" stereo to last my lifetime.

Thanks again!  You all are "awesome" (in the original, intended meaning - back when the topography
   was different and we all walked up to school, and then up again back home!).

Take care, Phill.


-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html