[Heath] Question

[Dave Edwards]

Just curious....Why does the SB-650 work better with ...for example, an SB301 than the solid state SB-303?
Does it have to do with tapping in to the oscillators without pulling them off?

....Dave
  ----- Original Message ----- 
  From: Glen Zook 
  To: heath at puck.nether.net ; w9bzn1 at gmail.com 
  Sent: Saturday, April 23, 2011 12:07 PM
  Subject: Re: [Heath] Question


        Try AADE for a readout.

        The SB-650 actually works better with the tube-type equipment than the SB-303.

        Glen, K9STH

        Website: http://k9sth.com

        --- On Thu, 4/21/11, william moody <w9bzn1 at gmail.com> wrote:


          From: william moody <w9bzn1 at gmail.com>
          Subject: [Heath] Question
          To: heath at puck.nether.net
          Date: Thursday, April 21, 2011, 9:24 PM


          I have a question for you gentlemen, I have purchased a hr1680 and hx1681 and would like to have a digital readout. Is there a such an device available for this setup made by heath or someone other than heath that I might turn to.....
           I am aware of the sb 650 but I thought it was just for the 303...
           Thanks Guys
               Bill


          -----Inline Attachment Follows-----


          _______________________________________________
          Heath mailing list
          Heath at puck.nether.net
          https://puck.nether.net/mailman/listinfo/heath
       



------------------------------------------------------------------------------


  _______________________________________________
  Heath mailing list
  Heath at puck.nether.net
  https://puck.nether.net/mailman/listinfo/heath
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20110423/a1445b1e/attachment.html>