[Heath] DX-40

[T David Cohen]

A DX-40 question - the DX-40 I recently acquired has a 20uF cap from pin
1 of the 6DE7 to the chassis.   The schematic in the partial manual I
have doesn't show the cap.  On  the chassis side it is tied to a solder
lug so it appears that some thought was given to installing it.  Can
someone with a later diagram confirm if it is correctly installed or, if
not, where it should be connected?    

 

Thanks for the help!

 

Dave Cohen, N7TC

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20110425/2e53adc9/attachment.html>