No subject

"Pour transformer oil into the pail until it reaches a level about 3/4"
from the top.  It is mandatory for proper oil circulation that the oil
level be 1/4" above the shield tube or resistor element when the pail lid
is installed."

Ed
K1ZOK

On Fri, 21 Feb 2003 22:26:42 +0200 oh8jep <apo at KOTINET.COM> writes:
> Hello!
>
> I got Heath dummy HN-31 from my Belgian Ham-friend,but during the 2
> weeks shipping time
> the oil inside was leaked to carton box,not all but at last half of
> the quantity.
>
> Does anyone knows,how full of oil that dummy must be,before it is
> fully capable that rated power 1KW input.
> Must be completely full,or must leave some vaporisation area?
>
> 73 de Aatos OH8JEP
>
> http://www.qsl.net/oh8jep
>
>
> PS. Many thanks for all the guys who has kindly sent me advices and
> suggestions for my SB-102 drive problem,all very welcome and
> helpful
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html