[Heath] Diode

Heinz Breuer hbreuer at debitel.net
Sun Oct 28 20:55:23 EDT 2012


Well it depends. If the 1N4007 is used for rf switching as a pin diode don't substitute it with another diode of the series. Only the 1N4007 has the pin diode characteristics.
vy 73 Heinz DH2FA, KM5VT

Von meinem iPhone gesendet

Am 28.10.2012 um 23:35 schrieb G3OOU at aol.com:

> In a message dated 28/10/2012 22:12:59 GMT Standard Time, mlt67 at embarqmail.com writes:
> Can a IN4005 replace a IN4007? Thanks Guy's
> The 1N4005 has a 600v peak maximum peak reverse voltage whereas the 1N4007 is 1000V. Current rating is the same. Google the part number for a data sheet.
>  
> 73
> 
> Bob
> Bob F Burns
> C Eng, FIET, MSE
> Amateur Radio Callsign: G3OOU
> Registered RSGB Instructor
> G-QRP Member No: 6907; Zone: 14, QRA: IO91WH; WAB: TQ25
> Secretary of Crystal Palace Radio & Electronics Club: www.g3oou.co.uk
> Technical web site: www.qsl.net/g3oou
> Follow G3OOU as @BobFBurns on Twitter Http://twitter.com/BobFBurns
> _______________________________________________
> Heath mailing list
> Heath at puck.nether.net
> https://puck.nether.net/mailman/listinfo/heath
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20121029/c2a3c990/attachment.html>


More information about the Heath mailing list