[Heath] [Heathkit] HW-101 Issue

[Glen Zook]

#3:  Make sure the additional antenna loading capacitor is good and is actually being switched.  This may require cleaning of the band switch and maybe some tightening of the contacts on the band switch.

#4:  Sounds like the LSB crystal has drifted off frequency.  Not unusual for the HW-10X series and the SB-Line equipment.
 
Glen, K9STH


Website:  http://k9sth.com


________________________________
 From: "Gary H. Harmon, Jr." <gharmon at idworld.net>
To: Heathkit1  <heath at puck.nether.net>; Heathkit2  <heathkit at mailman.qth.net>; Heathkit3 LIST <heathkit at yahoogroups.com> 
Sent: Wednesday, February 27, 2013 12:41 PM
Subject: [Heathkit] HW-101 Issue
 
I just finished three HW-101 alignments and operational tests.  All working
as expected with cleanup, new rubber belts, etc.



This forth one is making up for the lack of problems with the previous
three.



1.  Replacement crystal fixed the 29.5 problem.



2.  Alignment is good.



3.  Output is low on 80 meters.



4.  USB receive noise and output is higher on USB than LSB.



Any thoughts on #3 and #4?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20130227/f427b711/attachment.html>