[Heath] Cleaning plastic

[G3OOU at aol.com]

Very small amounts of alcohol, methylated spirits or white spirit -  
definitely not cellulose thinners.
 
Brasso (very old UK brass and copper cleaner liquid) does a fair job if the 
 surface is very bad and also provides a polished finish.
 
Brasso also does a good job on my uPVC outside window sills which lose  
their gloss after a few years of weathering.
 
73

Bob

Bob F Burns G3OOU,  G-QRP 6907, @BobFBurns
Crystal Palace Radio & Electronics Club: _www.g3oou.co.uk_ 
(http://www.g3oou.co.uk/) 
Technical web site: _www.qsl.net/g3oou  

 
In a message dated 04/10/2015 17:51:19 GMT Standard Time, kd6edv at gmail.com  
writes:

What do  you use to clean plastic on radios?  
_______________________________________________
Heath mailing  list
Heath at puck.nether.net
https://puck.nether.net/mailman/listinfo/heath


_ (http://www.qsl.net/g3oou) 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20151004/eadbfd78/attachment.html>