[Heath] SB 610 and SB 401 questions

The Pollacks rinkies at att.net
Sat Mar 5 15:34:26 EST 2016


This question comes up once in a while.  VE3LU is correct.

 

The only reason a crystal pack is needed, or useful, is if you’re not using an SB3XX receiver.  With a Heath receiver, you can choose between split and transceiver by using the “Locked-Unlocked” switch.  The function  switch, part of the on-off switch, should always be on Transceive when using  the Heath receiver, and Transmit only when using the crystal pack.

 

Take it from me; I’ve been using a SB401/303  combo without crystal pack since I built them in 1970, and still have them on the air regularly!

Ron K2RP

 

From: Heath [mailto:heath-bounces at puck.nether.net] On Behalf Of Guy Giacopuzzi
Sent: Thursday, March 03, 2016 10:41 AM
Cc: heath at puck.nether.net
Subject: Re: [Heath] SB 610 and SB 401 questions

 

I don't think that's right...because I've run split....and I don't have the xtal pack....
Guy,
WA6OQQ

On 3/3/2016 5:36 AM, Mark Johnson wrote:

Yes and no. You can use the SB 401 without the crystal pack if you operate with the SB 300, SB301 and SB303 receivers, with the pair in transceiver mode on the same frequency. If you ever want to operate in "split" mode, the SB 401 using its own LMO to control the transmit frequency, then you need the optional crystal pack.

 

And yes, if you use the SB 401 without a Heath receiver, the you also need the crystal pack.

 

Mark

VE3LU

Sent from my iPad


On Mar 3, 2016, at 8:02 AM, Guy Giacopuzzi <gggdds at js-net.com> wrote:

I think you only need the xtal set for the 401 if you're NOT using it with a matching receiver...i.e. and SB-300,301 or 303...I think you can even use the 401 as a "separate" on a different frequency when using one of these receivers and it will still work...
Guy

On 3/2/2016 7:20 PM, Jim's wrote:

Thanks Mark, I do have a couple of hw’s in various condition of repair and can use these. 

 

Jim 

 

From: Mark V Johnson [mailto:mvjohn at sympatico.ca] 
Sent: Wednesday, March 2, 2016 6:33 PM
To: 'Jim's'  <mailto:Jsutherin at roadrunner.com> <Jsutherin at roadrunner.com>; heath at puck.nether.net
Subject: RE: [Heath] SB 610 and SB 401 questions

 

Jim, forgive me if I’m being obvious but a “crystal pack” for an SB-401 can be obtained from any Heath transceiver. I’ve been buying up HW-101’s for parts, such as the crystal sets, as the crystals do at times fail and HW-101 parts rigs are fairly plentiful and cheap. Chuck Penson in his Heathkit book, estimates that Heath made nearly 30, 000 HW-101 kits! Also, all SB-400’s came with the full set of crystals so if you can find an SB-400 parts rig, your good to go. 

 

From: Heath [mailto:heath-bounces at puck.nether.net] On Behalf Of Jim's
Sent: Wednesday, March 2, 2016 4:06 PM
To: heath at puck.nether.net
Subject: [Heath] SB 610 and SB 401 questions

 

I have a SB 610 that needs a new screen. Is there anyone that has one for sale or can describe how to refurbish the one I have? 

Also I am looking for a xtal set for a SB 401 

 

Thanks 73 

Jim K8DHC






_______________________________________________
Heath mailing list
Heath at puck.nether.net
https://puck.nether.net/mailman/listinfo/heath

 

-- 
<2012email_signature.jpg>

_______________________________________________
Heath mailing list
Heath at puck.nether.net
https://puck.nether.net/mailman/listinfo/heath

 

-- 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20160305/7fc86ea6/attachment.html>


More information about the Heath mailing list