[Heath] DX-60A Grid Tune Issue

[Robert Wood]

Hello DX60 Techies,
 
I have a DX-60A that has more than enough drive on 80M and tunes up great -
about 75 watts out.
 
Unfortunately 40M thru 10M is QRP.  The maximum drive level for 40M is about
2ma, and 20M through 10M less than .5ma.  The Final Tune and Final Load
controls have little affect on the meter in plate position.
 
Does anyone know how to adjust L1?  I cannot find any information in the
manual other than it says it is for 40 through 10.  I tried adjusting it up
and down a little with no change.
 
Thank you for any assistance.
 
Bob K5MBA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20170407/3c2a5821/attachment.html>