[Heath] SB-102 LMO

[Mark V Johnson]

The copper braid suggestion; solder a braid directly from the variable cap rotor to the frame, can be done on the SB-102 solid state LMO. I’ve done it a few times. Access is not as easy as it is with the tube type LMO’s but with a little patience, a steady hand and a hot soldering iron, it can be done successfully. 

 

Mark

VE3LU

 

From: Heath [mailto:heath-bounces at puck.nether.net] On Behalf Of Mike Fitzgerald
Sent: Friday, April 13, 2018 4:20 PM
To: Heath
Subject: [Heath] SB-102 LMO

 

The last four posts are out of sequence...The first of the four was the last of the four... 

 

---

New Outlook Express and Windows Live Mail replacement - get it here:

http://www.oeclassic.com/

 

 


 <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> 

Virus-free.  <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20180413/83f29cb9/attachment.html>