[Heath] Calling Heath SB 220 EXPERT TECHS

[Guy Giacopuzzi]

....and when you say you "have HV", have you measured this somewhere 
else?  How do you know, if your meter's going negative?

Guy


On 2/2/2018 1:19 PM, John King via Heath wrote:
> Folks, I have a question. My SB 220  amp has filaments and HV. BUT, 
> when amp is turned on, the plate meter goes negative slightly and 
> softly. In addition, grounding the relay jack does not key up the amp. 
> No relay pull in or click and no resting current on finals.
>
> I replaced the diode that provides relay voltage thinking the relay 
> supply might not be providing voltage.
>
> I am puzzled because the relay keying circuit is simple but given the 
> negative movement of the plate meter makes me wonder if something is 
> wrong on the rectifier/metering board.
>
> 73, John, K5PGW
>
>
>
> _______________________________________________
> Heath mailing list
> Heath at puck.nether.net
> https://puck.nether.net/mailman/listinfo/heath

-- 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20180202/c5d46f05/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2012email_signature.jpg
Type: image/jpeg
Size: 117949 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/heath/attachments/20180202/c5d46f05/attachment-0001.jpg>