[Heath] HP-23 power supplies - an idea and some questions.

[Kenneth G. Gordon]

On 5 Feb 2018 at 1:12, James Hauser wrote:

> 
> Ken,
> 
> If you check the manual the 820 volts DC is the no 
> load voltage.  The full rated load voltage is 700 
> volts at 250 ma.  
> 
> Jim  N8UQ

Correct...except that the first-model outputs about 650 to 675 VDC at 250 mA.

In fact, I'll put the two power supplies I have here on the bench, load them to 250 mA and 
report my exact findings as soon as I can.

Thanks,

Ken W7EKB

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus