[Heath] Trying to connect a SB 104 to a SB 200 -- need help/information

[A Lawrence Fibich]

Trying to connect the SB 104 to drive the SB 200 --- earlier told connect to pins 8 (relay) and pin 9 (ground) to go to turn on the SB 200.  But in looking at the schematic and wiring diagram for the Heathkit power supply HP-1144 this isn't right-- e.g. pin 7 (GRN), 8 (BLU), 9 (VIOL), 10 (no wire)  are all tied together - and schematic for the power supply give no indication how it would work if even I separated the wires/connections.? Anyone have a helpful clue-- interesting - like ALL other Heathkit transceivers give instructions on connecting the SB 200 -- ?? not this unit ??
Thank you ALL in advance for all your helpfulness...
Larry FibichAF6LFSacramento (916) 966-0266 (h)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20180618/2e13edc3/attachment.html>