<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>
<META content=text/html;charset=iso-8859-1 http-equiv=Content-Type>
<META content='"MSHTML 4.72.3612.1706"' name=GENERATOR>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT color=#000000 size=2>Walt yatzook was looking for the 11 pin plug
used in Heath PS..</FONT></DIV>
<DIV><FONT color=#000000 size=2></FONT> </DIV>
<DIV><FONT color=#000000 size=2>I have had good success with using P&B or
Kurmelec relays. These have an 11 pin male base mounted on a nice looking
plastic case that contains the relay (used in a/c or appliance switching) and
fits the Heath stuff perfectly. The case can be used as the "cap"
after the relay guts are removed. The socket for these relays is usually easy to
find at an airconditioning/ heating shop. I found my relay/ socket at a surplus
house and bought the two along with a new Hammond cabinet for 10
bucks. </FONT></DIV>
<DIV><FONT color=#000000 size=2></FONT> </DIV>
<DIV><FONT color=#000000 size=2>Another solution is to use some brass or copper
rod stock for pins, use a small pill jar or a 35mm plastic film canister as a
form, run the cable through the form, solder the wires to the pins (using the
socket as a template), fill the pill bottle with epoxy, place the pill bottle
over the asembly and hey presto!, an instant plug. Just don't stick the bottle
cap plug to the socket! </FONT></DIV>
<DIV><FONT color=#000000 size=2></FONT> </DIV>
<DIV><FONT color=#000000 size=2>Cheers</FONT></DIV>
<DIV><FONT color=#000000 size=2></FONT> </DIV>
<DIV><FONT color=#000000 size=2>Keith</FONT></DIV></BODY></HTML>