<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#FFFFFF">
Hi Steve:
<p>The original meter is 1 ma full scale at 50 ohms. Interpret the
scales as follows:
<p>METER SWITCH POSITION MEASURES
RANGE OF READING
<p>Driver
Driver Plate
0-50 ma.
<br>
Current
<p>Grid
Final Amp
0-10 ma.
<br>
Grid Current
<p>Plate
Final Amp
0-500 ma.
<br>
Plate Current
<p>Volts
Final Amp
0-1000 volts
<br>
Plate Voltage
<p>Modulator
Modulator
0-250 ma.
<br>
Plate Current
<p>That's all the info I have on it.
<p>73,
<p>Keith
<p>STEVE WATERS wrote:
<blockquote TYPE=CITE> <font color="#000000"><font size=-1>Hello All</font></font><font color="#000000"><font size=-1>Another
Apache question. The manual I</font></font><font size=-1>received with
this rig calls for a meter with</font><font size=-1>three scales. 0-10,
0-25, 0-50. My rig has</font><font size=-1>a Heathkit meter with two scales.
0-5 and</font><font size=-1>0-250. I suppose that this one should be used</font><font size=-1>in
another rig? I guess that if the meter ratings</font><font size=-1>are
the same then can use this one. My manual</font><font size=-1>is incomplete
and I don't have the specs for the</font><font size=-1>rating for the correct
meter and as of yet have not</font><font size=-1>determined the rating
for the meter movement that</font><font size=-1>is currently installed.
Help!!!</font><font size=-1>Steve</font> </blockquote>
</body>
</html>