<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.3013.2600" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Thank you for your info.</FONT></DIV>
<DIV><FONT size=2>I tryied tunning with a dip in plate current and </FONT></DIV>
<DIV><FONT size=2>output is a little less but AM on peek reading </FONT></DIV>
<DIV><FONT size=2>watt meter has nice fwd swing .</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>I was tunning AM with 100% mod buy heeellllo into mike
</FONT></DIV>
<DIV><FONT size=2>and 100 % mike gain to get best AM tunning.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>I was stating my manual about 2 tone SSB and CW.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>no AM loading was told.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>I do not have manuals for all my HF amps.</FONT></DIV>
<DIV><FONT size=2>I do have most diagrams for them.</FONT></DIV>
<DIV><FONT size=2>YES I found I have to reduce AM level from RCI 2950 and outher
rigs.</FONT></DIV>
<DIV><FONT size=2>setting FM/CW is easy.I load FM to max buy starting
</FONT></DIV>
<DIV><FONT size=2>out with low drive into dummy load and going to max and switch
to antenna and just tweek a little.then switch SSB if needed.</FONT></DIV>
<DIV><FONT size=2>This does not work for am.I loged the tunning numbers and
</FONT></DIV>
<DIV><FONT size=2>retuned AM with mod and found only load(ANT)
moved</FONT></DIV>
<DIV><FONT size=2>less cap about 3 to 5% less.</FONT></DIV>
<DIV><FONT size=2>This is not the same for each amp.</FONT></DIV>
<DIV><FONT size=2>Thank you for your input on HF tunning on AM.</FONT></DIV>
<DIV><FONT size=2>This is not told in the manual I have.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>Robert</FONT></DIV>
<DIV> </DIV></BODY></HTML>