[From nobody Mon Jan 10 18:44:13 2011
Message-ID: <3B054ADD.E5C469EF@brevard.net>
Date: Fri, 18 May 2001 13:16:30 -0300
From: "Charles W. Morehouse" <w4gbw@brevard.net>
X-Mailer: Mozilla 4.05 [en]C-EZN  (Win16; U)
MIME-Version: 1.0
To: HEATHKIT <heath@listserv.tempe.gov>
Subject: TT-1A question
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hi Folks,
Have restored the above tester. It works fine but I have a question and
the manual is very vague. On the spring loaded grid leak test, I always
get a small meter reading but on some tubes it is large. So I remove the
tube and check again, then replace the valve and see if it is different.
If much different I trash. Anyone have comments?  This switch was
trashed because some twit had soldered the contacts. Then a later twit
force turned it breaking the wafers. Restored it using contacts from
another, tiny screws and JB Weld. Sorry to take you all away from the
ebuy thread. Later.
Wayne;
W4GBW

]