<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=windows-1251">
<META content="MSHTML 5.50.4134.100" name=GENERATOR></HEAD>
<BODY>
<P>
<DIV></DIV>
<DIV>Gentlemen,</DIV>
<DIV> </DIV>
<DIV> I picked up a DX-60B, HR-10B and the HG10 vfo that I would like to set up and work a little am and cw with. What is the most painless way to set them up to work together. I know the receiver has a muting circuit. Mine shows it has about 178 volts on it. I suppose that would be to power an outboard relay? I also have a 110v dow key relay that could be used but I'm unsure where to pick up the voltage from on the tx or to just give it a power cable to plug in? I guess I could always just use the standby switch on the rx when transmitting but I think I want a better way than that. Thank's for any suggestions.</DIV>
<DIV> </DIV>
<DIV>73</DIV>
<DIV>Jerry</DIV>
<DIV>W9CTB</DIV>
<DIV> </DIV>
<DIV>--- Jerry Kitterman</DIV>
<DIV>--- <A href="mailto:kitt5@earthlink.net">kitt5@earthlink.net</A></DIV>
<DIV>--- EarthLink: The #1 provider of the Real Internet.</DIV>
<DIV> </DIV>
<P></P></BODY></HTML>
-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------
Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH@LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html