I realize you are trying to stay as near to original as possible. BUT!! those have always been a weak part in these rigs. I would replace them with modern 10 turn pots for much better results and easier adjustments. Just my $0.02!:-) 73 de Jerry, KØEJF E.J.(Jerry) Forwood -- Jim Flanagan wrote: Guys... I am hoping someone knows where to find the small potentiometer(s) which were used in the SB/HW series of transceivers. They were PCB mounted from the bottom of the board with a 1" long plastic shaft that came out the top of the PCB. I realize that you could substitute someother part but I am trying to replicate the original as best as possible. Is it possible to refurbish these parts? Whatever tips you can suggest would be appreciated. -jim ----------------------------------------------------------- Products bought, sold or traded here is the responsibility of the parties involved. This list and the City of Tempe are not responsible for losses or misrepresentations of any kind. Buyer beware! ----------------------------------------------------------- This list is a public service of the City of Tempe, Arizona ----------------------------------------------------------- Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH To post - HEATH@LISTSERV.TEMPE.GOV Archives - http://listserv.tempe.gov/archives/HEATH.html ----------------------------------------------------------- Products bought, sold or traded here is the responsibility of the parties involved. This list and the City of Tempe are not responsible for losses or misrepresentations of any kind. Buyer beware! ----------------------------------------------------------- This list is a public service of the City of Tempe, Arizona ----------------------------------------------------------- Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH To post - HEATH@LISTSERV.TEMPE.GOV Archives - http://listserv.tempe.gov/archives/HEATH.html