<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
On 2/17/2015 4:56 PM, John King via Heath wrote:
<blockquote
cite="mid:586558481.5621388.1424213785700.JavaMail.yahoo@mail.yahoo.com"
type="cite">
<div style="color: rgb(0, 0, 0); background-color: rgb(255, 255,
255); font-family: HelveticaNeue,Helvetica
Neue,Helvetica,Arial,Lucida Grande,sans-serif; font-size: 12px;">
<div dir="ltr" id="yui_3_16_0_1_1424205733177_41132">My
grandson's Heath 104A transceiver has a couple of nixie tubes
in the VFO display out. They are heath part number 411-295
which is a SP-352 display tube. Does anyone know of a source
for these display tubes. If so please advise me of the source.
He is KG5EOV, Morgan, a high school freshman. I want to help
him get the display working. He has it pumping out its' rated
output in watts thanks to the gracious assistance of Mike
Bryce, WB8VGE of the Heathkit Shop.</div>
</div>
</blockquote>
<br>
Unless you luck out and find some new old stock that are still good,
new neon frequency display replacements are now very expensive and
not worth the cost for most SB-104A owners. The problem with those
digital displays was the way they were manufactured many years ago -
they used narrow HV gas-discharge channels for the number segments,
and the cubes were laminated together in layers which eventually
allowed the neon gas to leak out. So, even if you find unused old
stock, it's possible that some or all of the gas may have leaked out
over the years, causing dim or missing number segments. Occasionally
they turn up on eBay, and some time ago I bought some; however,
because of age they were dim, a waste of time.<br>
<br>
The ideal fix is to replace the display board with new circuitry
that drives same-size low voltage LED digital readouts - back around
2002-2004 Mike Bryce used to sell such a kit that was a direct
drop-in replacement and also eliminated the RF-noisy HV (180V ?)
converter board that was needed to light the original neon displays,
but you will have to ask him if he still has any kits. If not, maybe
you can persuade him to give you a copy of the schematic and parts
list. If you get one you might consider using higher-value dropping
resistors, as the displays seemed a bit too bright to me.<br>
<br>
Let us know if you find a schematic for the LED display board, I
imagine quite a few 104 owners would like a copy.<br>
<br>
73<br>
John KE5ZB<br>
<br>
<br>
<br>
<br>
<br>
</body>
</html>