Hello, Folks! My little HR-20 Rcvr works really well after a good realignment, BUT the S-Meter is very stingy. Sigs that are +20dB on a properly set-up rig are maybe S7 on the HR-20. Sigs less than S9 on my other rigs, barely flicker the S-Meter. I thought that the S-Meter amp tube was soft, but it's OK after subsritution, so I'm not sure where to start looking. I suspect that some of these older components have changed out-of-tolerance, but where's a good place to start measuring? The HR-20's S-Meter zero pot was dirty but now zeroes perfectly after cleaning, and the Antenna tuning cap is peaked before reading.<div><br></div><div>Thanks and 73,  Sandy AC1Y</div><br><br>-- <br>Sent from Sandy'sGmail Mobile<br>