<div dir="ltr">I recently completed an electrolytic cap replacement project on an HW-20 Pawnee 2M AM rig.  When I took the bottom plate off the chassis, I noticed that nearly all of the big 0.02mfd disc ceramic bypass caps appeared to have had their outer coverings melted.  There were actual drops of stuff hanging off the bottoms of the caps.  I don't see why this would be happening since there's nothing underneath the chassis that would cause so much heat.  Previously, I did a restoration on an HW-10 Shawnee which has essentially the same circuitry and it didn't have this condition.<div><br></div><div>Any ideas as to why this would happen?  It has me a bit worried.</div><div><br></div><div>Doug</div><div>VE7DRF</div></div>