<div dir="ltr">I acquired Heathkit Ham radio and worked on my technician and general exams to earn the callsign soon.<br><br>I cleaned my SB-644A, Remote VFO, and checked everything to ensure it was in good working order. I have a pair of shielded coaxial cables to link with my Heathkit SB-104A transceiver. Both ends use RCA male phono connectors. I realized they were short, a foot long. They cannot reach the remote VFO unless I have put them on the left instead of the right. I checked the assembly manual, and it showed that #343-3, a large, coaxial cable, came 4 feet long. It has cut to 2 feet long instead of one foot long. I decided to get a new coaxial cable. The original cable labeled as follows:<br><br>300V  80 degree  FR-1  (UL)  AWN  STYLE  1436<br><br>I searched for the specification for that cable. Unfortunately, there was almost no information such as 50-ohms? I called three different vendors, and they did not know much about it. I think I can use RG-8x coaxial cable, but I am not sure if this kind of cable can be attached with an RCA male connector? What is your suggestion?<br><br>73,<br>Steven<br></div>