From Tudor at nedlook.nl Wed Jun 7 08:24:01 2017 From: Tudor at nedlook.nl (Tudor Capatina) Date: Wed, 7 Jun 2017 12:24:01 +0000 Subject: [huawei-nsp] igmp for access-users on vpn-instance In-Reply-To: References: Message-ID: <07c1f87bda964fcb82cebc2193005934@nedlook.nl> Hello, I am trying to enable igmp on a ME60 towards some access-users connected on subinterface GigabitEthernet1/0/1.1000 in a certain vpn-instance. However when I check igmp on that interface it reports it is only enabled on public net and not on the respective vpn-instance. Am I missing anything config-wise to getting this to work Config is below: multicast routing-enable ip vpn-instance Customer ipv4-family route-distinguisher 101:101 multicast routing-enable # interface GigabitEthernet1/0/1 undo shutdown igmp enable multicast binding vpn-instance Customer # interface GigabitEthernet1/0/1.1000 pppoe-server bind Virtual-Template 1 ipv6 enable ipv6 address auto link-local igmp enable user-vlan 1000 1199 bas # access-type layer2-subscriber default-domain authentication inet roam-domain inet client-option82 # igmp vpn-instance Customer -- display igmp interface gi1/0/1 Interface information of VPN-Instance: public net GigabitEthernet1/0/1(-): IGMP is enabled Current IGMP version is 2 IGMP state: down IGMP group policy: none IGMP limit: - Value of query interval for IGMP (negotiated): - Value of query interval for IGMP (configured): 60 s Value of other querier timeout for IGMP: - Value of maximum query response time for IGMP: 10 s Querier for IGMP: - Any suggestions are appreciated! Thanks, Tudor Capatina -------------- next part -------------- An HTML attachment was scrubbed... URL: From jeremyparr at gmail.com Wed Jun 7 22:39:25 2017 From: jeremyparr at gmail.com (Jeremy Parr) Date: Wed, 7 Jun 2017 22:39:25 -0400 Subject: [huawei-nsp] igmp for access-users on vpn-instance In-Reply-To: <07c1f87bda964fcb82cebc2193005934@nedlook.nl> References: <07c1f87bda964fcb82cebc2193005934@nedlook.nl> Message-ID: The last message on this list was nearly a year ago, and it went unanswered. I forgot I was even on it. On Wed, Jun 7, 2017 at 8:24 AM, Tudor Capatina wrote: > > > Hello, > > > > I am trying to enable igmp on a ME60 towards some access-users connected > on subinterface GigabitEthernet1/0/1.1000 in a certain vpn-instance. > However when I check igmp on that interface it reports it is only enabled > on public net and not on the respective vpn-instance. Am I missing anything > config-wise to getting this to work > > > > Config is below: > > > > multicast routing-enable > > > > ip vpn-instance Customer > > ipv4-family > > route-distinguisher 101:101 > > multicast routing-enable > > # > > interface GigabitEthernet1/0/1 > > undo shutdown > > igmp enable > > multicast binding vpn-instance Customer > > # > > interface GigabitEthernet1/0/1.1000 > > pppoe-server bind Virtual-Template 1 > > ipv6 enable > > ipv6 address auto link-local > > igmp enable > > user-vlan 1000 1199 > > bas > > # > > access-type layer2-subscriber default-domain authentication inet > > roam-domain inet > > client-option82 > > # > > igmp vpn-instance Customer > > > > -- > > > > display igmp interface gi1/0/1 > > Interface information of VPN-Instance: public net > > GigabitEthernet1/0/1(-): > > IGMP is enabled > > Current IGMP version is 2 > > IGMP state: down > > IGMP group policy: none > > IGMP limit: - > > Value of query interval for IGMP (negotiated): - > > Value of query interval for IGMP (configured): 60 s > > Value of other querier timeout for IGMP: - > > Value of maximum query response time for IGMP: 10 s > > Querier for IGMP: - > > > > Any suggestions are appreciated! > > > > Thanks, > > Tudor Capatina > > _______________________________________________ > huawei-nsp mailing list > huawei-nsp at puck.nether.net > https://puck.nether.net/mailman/listinfo/huawei-nsp > > -------------- next part -------------- An HTML attachment was scrubbed... URL: