[j-nsp] JUNOS 5.4R2.4 cflow timestamps not changing

[hayter]

Anybody else seen this?  We upgraded to 5.4R2.4 a couple of days ago
and since then the timestamps on cflow export haven't changed at all.

using flow-tools (the Cisco's are reporting proper times, so I'm
pretty sure the flow-tools work fine).

1002.18:28:47.470 1002.18:28:47.470 50    128.125.233.83  1214  53    80.25.207.176   3271  6   0  1          40        
1002.18:28:47.475 1002.18:28:47.475 50    128.125.233.83  4462  53    65.164.233.213  1214  6   0  1          40        
1002.18:28:47.443 1002.18:28:47.443 50    128.125.233.83  1214  53    65.196.22.253   62850 6   0  1          40        
1002.18:28:47.468 1002.18:28:47.468 50    128.125.245.83  50506 49    128.125.182.157 443   6   0  1          52        

and the system time seems to be ok:

# run show system uptime 
Current time:      2002-10-04 13:02:04 PDT
System booted:     2002-10-02 18:26:16 PDT (1d 18:35 ago)
Protocols started: 2002-10-02 18:27:18 PDT (1d 18:34 ago)
Last configured:   2002-10-04 12:34:04 PDT (00:28:00 ago) by whacl
 1:02PM  up 1 day, 18:36, 2 users, load averages: 0.08, 0.11, 0.08

but all of the cflow data claims it's 2002-10-02 18:28:47.  it seems the
fractional part of the time changes, but the day/h/m/s part is always
the same....

----
Carl Hayter
ISD - Data Network Operations
University of Southern California