[j-nsp] Juniper VPN design examples - error ?

[Gary Tate]

Hi Neil,

Thanks for pointing this out.  I have some comments in line for you 
and I have passed on your observations to out tech pubs peole.

Gary

Neil Stirling wrote:
> Hi guys,
> 
> I have found some errors in the Juniper r5.5 documentation on-line, and 
> was wondering if anyone else has seen this ?
> 
> The errors relate to L2 VPN's, and are;
> 
> - iBGP local address is described as remote PE address rather than the 
> local lo0 interface (this seems to appear quite often throughout).

I will pass this onto our documentation people

> [vpnl2-examples5.htm]
> 
> - VRF/protocols/l2vpn/site Sunnyville/interface includes remote-site-id 
> in one config example, and not in the summary page config....I think 
> that including the remote-side-it is wrong.....cannot be remote as it is 
> locally connected.

Remote-id is the id of the remote site that this local interface is 
logically conected to over the provider network.  It is used when 
you want to specify non contiguous connections or you just want the 
configuration to be clear.

I you send the correct link I will make sure it is correct

> [vpnl2-examples6.htm compared against vpnl2-examples10.htm]
> 
> This dates back to r5.1, and I haven't checked L3 yet.

I'm not sure what this means can you explain

> Neil.
>