[j-nsp] CoS

[Jonathan Tse]

How could I tell it is an ATM1 or ATM2, by show chassis hardware?

----- Original Message -----
From: "Kevin Oberman" <oberman@es.net>
To: <NKombiyil@bloomberg.com>
Cc: <juniper-nsp@puck.nether.net>
Sent: Wednesday, October 30, 2002 10:49 PM
Subject: Re: [j-nsp] CoS


> > From: NKombiyil@bloomberg.com
> > Sender: juniper-nsp-admin@puck.nether.net
> > Date: Wed, 30 Oct 2002 07:08:41 -0500
> >
> > Does anyone know if CoS configuration is supported on the ATM (stm-1 in
my case) interfaces?
>
> It's not officially supported for ATM1 cards. It will be on the new
> ATM2 cards. It should work on ATM1 cards IF you only have a single VC
> running on it. (That's usually not too useful.)
>
> R. Kevin Oberman, Network Engineer
> Energy Sciences Network (ESnet)
> Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
> E-mail: oberman@es.net Phone: +1 510 486-8634
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>