[j-nsp] OC-12 rate

[Matt Kolon]

Miguel Angel:

This refers to the traffic shaping parameters of a single VC, not the 
interface speed. While this is the case with OC-12 ATM 1 PICs (the ones 
available when the book was written), ATM 2 PICs (available now) 
support an OC-12 traffic shaping rate of 100%.

Thanks,

/matt


On Wednesday, October 30, 2002, at 01:02 PM, German Martinez wrote:

> Miguel,
> I do not know where you read this from.
> I can tell you that this is not true.
> Juniper can forward packets at line rate (OC-12c) and even at higher
> speeds
>
>
> Thanks
> German
>
> On Wed, 30 Oct 2002, Miguel Angel Sotos wrote:
>
>> Hi all,
>> 	I'm reading 'Juniper Network Routers, the Complete
>> reference'
>> In the ATM interfaces section it says:
>> 'The maximum OC-12 rate is half of the effective line rate and is 276 
>> Mbps'
>>
>> Is that really true?
>>
>> Thanks in advance, Miguel Angel.
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp@puck.nether.net
>> http://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>