[j-nsp] ERX
Jonathan Tse
jonathantse@pacific.net.sg
Wed, 4 Sep 2002 14:09:13 +0800
We have just rebooted the box and it is now running erx_3-4-1p4-2.rel. I
suspect the bug will only occur when the setup is in certain way. Are you
using the management port to receive telnet/ssh packets?
----- Original Message -----
From: "Joe Lin" <jlin@doradosoftware.com>
To: "'Jonathan Tse'" <jonathantse@pacific.net.sg>;
<juniper-nsp@puck.nether.net>
Sent: Wednesday, September 04, 2002 6:38 AM
Subject: RE: [j-nsp] ERX
> The latest is
>
> System Release: erx_3-4-1p3-0.rel
>
> erx_3-4-1p3-0.rel
>
> maybe the latest patch will help you with this issue??
>
> -joe
>
>
> -----Original Message-----
> From: juniper-nsp-admin@puck.nether.net
> [mailto:juniper-nsp-admin@puck.nether.net] On Behalf Of Jonathan Tse
> Sent: Sunday, September 01, 2002 10:42 PM
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] ERX
>
> Hi all,
>
> Not sure is it right to post ERX question here.
>
> We have an ERX-700. Every month we must come across a problem that we
> can't
> login or console in to the box. But traffic and routing information
> still
> able to pass through. We are using the latest code (erx_3-4-1p0-1.rel).
>
> Has there any one experienced such problem?
>
> Thanks!
>
> Jonathan Tse
> Senior Network Engineer, Pacific Internet - Singapore
> NOC: +65 6872-1010 DID: +65 6771-0843 FAX: +65 6872-6674
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>