[j-nsp] IPV6 accounting question.

Joe Metzger metzger@es.net
Tue, 10 Sep 2002 17:57:36 -0500


Hi,
does anybody know how to track IPV4 vs IPV6 packet and byte counts on a
sub interface?

We would like to bring up IPV6 peering at an ATM exchange point.
The exchange provider only provides 1 PVC between members.
We currently track IPV4 bytes and packet counts per interface.
We need to track IPV6 byte and packet counts per interfacen
as well.

This is easy at exchanges that allow multiple PVCs between
members or GE exchange points where we can use Vlans. We just
setup a PVC or vlan for V4 and another for V6. However, I can't
figure out how to do this at an ATM exchange like MAE-WEST.

I have looked at the Juniper MIBs but they only appears to be
giving me 1 set of counters per box, not one per interface.


-- 
Joe Metzger
metzger@es.net
Network Engineering,  ESnet
Lawrence Berkeley National Laboratory